Epson 386SX Uživatelský manuál Strana 30

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 284
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 29
Using the Serial Interface
If you have a printer, a modem, or any other peripheral with a
serial interface, you can connect it to the serial (RS-232C) port
on the back of the computer.
The Equity 386SX
uses a DB-9P male connector, so be sure you
have a compatible cable. To connect a serial device, follow the
same steps as above for connecting a parallel device.
Note
You need to ensure that the serial port is set up so it
functions properly. If you are using the port for a serial
printer, you need to redirect printer output to the serial
port instead of the parallel port. To do this, you can use the
MS-DOS MODE or SETMODE command or the MENU
program. See your MS-DOS Reference Manual for
instructions.
1-10
Setting Up Your System
Zobrazit stránku 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 283 284

Komentáře k této Příručce

Žádné komentáře