Epson 84 Uživatelská příručka Strana 106

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 199
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 105
106 Fine-Tuning the Projector
Adjusting Signal Settings
Although the projector normally detects and optimizes the input
signal automatically, you can use the Signal menu to make manual
adjustments. In addition to changing the position of the projected
image, you can correct tracking and sync for computer images, or
change the aspect ratio to widescreen format for video images.
1. Press the
Menu button, select the Signal menu, and press Enter.
You see a screen similar to one of those below. (The settings will
be different depending on the source you are projecting from.)
2. Use the pointer buttons to highlight the desired option, then
adjust it as needed:
Auto Setup
Leave this setting on to automatically optimize the image
when
Computer is selected as the source. Turn it off if you
want to save adjustments you have made to the video settings.
Resolution
When set to Auto, the resolution (size) of a computer image
is automatically detected so it can be scaled to fit in the
projection area. If the image doesn’t display properly after
you adjust the aspect ratio setting (see page 36), select
Wide
to project from a computer with a wide-panel display, or
Normal for a computer with a 4:3 or 5:4 display.
Tracking
Adjust this value to eliminate vertical stripes in the image.
Sync
Adjust this value if the image appears blurry or flickers.
note
You can also use the remote
control’s Auto button to
automatically reset the
projector’s tracking, sync,
resolution, and position
settings. See page 30 for
details.
Computer image Composite video/S-VideoComponent video
tip
Before adjusting tracking or
sync, fill the screen with an
image containing fine
detail, such as black text on
a white background.
Zobrazit stránku 105
1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 198 199

Komentáře k této Příručce

Žádné komentáře