Epson PowerLite 54c Uživatelská příručka stáhnout pdf (Strana 26)

26 Setting Up the Projector

Connecting a Component Video Source

If your video source has component video connectors, you can use

them to project a higher quality video image. You’ll need a

component video cable, which can be purchased from EPSON

(ELPKC19). See page 12.

Before starting, make sure the projector and your DVD player or

other video device are turned off.

1. Connect the large end of the component video cable to the

projector’s

Computer1/Component Video1 or the

Computer2/Component Video2 port.

2. Insert the three ends of the component video cable into the

R, G, and B ports on your video source.

3. Connect the audio plugs on the RCA A/V cable as described on

page 22.

4. Once the projector is turned on, be sure to:

■ Select the correct source to see your image: Component

Video1 (YCbCr), Component Video1 (YPbPr)

Component Video2 (YCbCr), or Component Video2

(YPbPr)

. See page 50.

■ Open the projector’s Image menu and select the correct

Input Signal setting to match your device and the port you

used:

Component Video1 (YCbCr), Component Video1

(YPbPr),

Component Video2 (YCbCr), or Component

Video2 (YPbPr)

. See page 50.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 105 106

Žádné komentáře

Epson PowerLite 54c Uživatelská příručka Strana 26