Epson EM07ZS1647F Specifikace stáhnout pdf (Strana 30)

2. Installation

(7) Tighten each screw securing the wires on the connector.

Tighten the screw securing the wire at a correct tightening torque (0.25 to 0.3 N·m). To

prevent thick cable from coming out due to cable tension, install enough thick cable

length to allow for stretch.

Use a small flat blade screwdriver that has the correct

width and thickness. If you use a typical screwdriver

whose point is narrow, you cannot deeply insert it into

the hole on the connector.

Specific screwdriver for DeviceNet connector screw:

OMRON : XW4Z-00C

Phoenix Contact : SZF-1 0.6×3.5

Thickness

Width

0.6 mm 3.5 mm

18 Fieldbus I/O Rev.6

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 167 168

Žádné komentáře

Epson EM07ZS1647F Specifikace Strana 30