Epson R1900 Rychlý návod

Procházejte online nebo si stáhněte Rychlý návod pro Tisk a skenování Epson R1900. Epson R1900 Start Here Guide Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 8
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
4 Remove only the yellow tape from each cartridge.
Caution: Don’t remove any
seals from the cartridge or
ink will leak.
5 Insert the cartridges in the holder for each color.
6 Press the cartridges down until they click.
7 Close the cartridge cover and press it down until it clicks.
8 Close the printer cover.
9 Press the ink button to charge the ink. Charging takes about
3 minutes.
Caution: To conserve ink, don’t turn off the printer while
the power light is flashing.
If anything is missing, contact Epson
®
as described on the back.
Remove all the tape and packing material. (There is more tape on the
printer than is shown below.)
Unpack
1
1 Connect the power cable.
2 Press the power button.
Turn on the power
2
*411086800*
*411086800*
Caution: Do not open an ink cartridge package until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Don’t load paper before installing ink cartridges.
1 Open the printer cover, then open the cartridge cover.
2 Shake the ink cartridges. (All cartridges except the gloss optimizer
cartridge make a clicking sound when you shake them.)
3 Unpack the ink cartridges.
Install ink cartridges
3
Sheet feeder
You can load plain paper, and most glossy and matte papers, in the
sheet feeder.
1 Open the paper support and pull up the extensions.
2 Open the output tray and pull out the extensions.
3 Load paper against the right edge and behind the tab. Then slide the
edge guide over.
Note: Don’t load the paper sideways. Always
load it short edge first.
Manual feed slot
You can print on these paper types using the single sheet guide and the
manual feed slot:
Epson Velvet Fine Art Paper
Epson Watercolor Paper Radiant White
Epson UltraSmooth
®
Fine Art Paper 250 gsm
PremierArt
Matte Scrapbook Photo Paper for Epson
1 Remove any paper from the sheet feeder and close the paper support.
2 Open the output tray and pull out the extensions.
Load paper
4
Start Here
Epson Stylus
®
Photo R1900
Zobrazit stránku 0
1 2 3 4 5 6 7 8

Shrnutí obsahu

Strany 1 - Start Here

4 Remove only the yellow tape from each cartridge. Caution: Don’t remove any seals from the cartridge or ink will leak.5 Insert the cartridges in t

Strany 2

4 Remove only the yellow tape from each cartridge. Caution: Don’t remove any seals from the cartridge or ink will leak.5 Insert the cartridges in t

Strany 3

4 Remove only the yellow tape from each cartridge. Caution: Don’t remove any seals from the cartridge or ink will leak.5 Insert the cartridges in t

Strany 4

4 Remove only the yellow tape from each cartridge. Caution: Don’t remove any seals from the cartridge or ink will leak.5 Insert the cartridges in t

Strany 5 - Install software

3 Slide the roll paper edge guide on the back of the printer all the way to the right.4 Attach the single sheet guide by aligning the notches on its

Strany 6

3 Slide the roll paper edge guide on the back of the printer all the way to the right.4 Attach the single sheet guide by aligning the notches on its

Strany 7

3 Slide the roll paper edge guide on the back of the printer all the way to the right.4 Attach the single sheet guide by aligning the notches on its

Strany 8

3 Slide the roll paper edge guide on the back of the printer all the way to the right.4 Attach the single sheet guide by aligning the notches on its

Komentáře k této Příručce

Žádné komentáře