Epson PowerLite 713c Uživatelská příručka stáhnout pdf (Strana 21)

Setting Up the Projector

Connecting to Video Sources

You can connect a DVD player, VCR, camcorder, laser disc player,

digital camera, or any other compatible video source to your projector.

The projector supports NTSC, PAL, and SECAM, and automatically

detects the video format.

A standard RCA A/V cable is included with the

projector. If your video source also has an S-video

jack (as shown with an S-video plug at the right),

you can use it to provide a higher quality video image. However,

you’ll need an S-video cable, which may be included with your video

source, or may be purchased from an electronics store or video dealer.

Follow the instructions below for your type of connection.

Connecting the RCA A/V Cable

Before starting, make sure the projector and your DVD player or

other video source are turned off.

1. Connect the yellow plug on one end of the A/V cable to the

projector’s

Video

jack. Then connect the audio plugs to the left

and right

Audio

jacks (insert the white plug into the

port and

the red plug into the

port).

2. Connect the plugs on the other end of the cable to the video-out

and audio output jacks on your video source.

note

The projector does not

support TV antenna cable

F connectors.

Video jack

RCA A/V cable

port

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 104 105

Žádné komentáře

Epson PowerLite 713c Uživatelská příručka Strana 21