Quick Setup

Choose a location

The projector supports 4 viewing setups. Choose the best one for

your environment. If you install the projector in a rear or overhead

position, you’ll need to choose the correct projection option,

identified below, from the Extended menu. See the User’s Guide

on your CD-ROM for instructions.

Table

Convenient for temporary front projection.

Choose

Front from the menu.

Ceiling

Professional installation recommended.

Choose

Front/Ceiling from the menu.

Rear

For installation behind a translucent screen.

Choose Rear from the menu.

Rear/Ceiling

Professional installation recommended.

Choose

Rear/Ceiling from the menu.

The distance between the projector and the screen determines

the size of the image. The diagrams below show approximately

how big your image will be (diagonally), based on where you set up

the projector. (For more help determining the size of your image,

try the Image Size Calculator on the Multimedia Projectors page on

Epson’s web site.)

2 Connect your video source

Connect the projector to a computer or video source using any of the available

connections shown below.

•

Check the connectors on your video equipment. If more than one

connection is available, choose the one that provides the best quality.

The projector connectors from highest to lowest quality are

Computer (Component Video), S-Video, and Video.

•

A computer cable is included. You can purchase optional video and

audio cables through Epson

or an electronics store.

•

You can connect up to 3 video devices and use the remote control to

switch between them.

NOTE

You can also connect an external monitor (to watch the display

on your computer monitor while watching the projection screen),

and a USB cable to use the remote control to change presentation

slides. See the

User’s Guide on your CD-ROM for instructions.

3 Set up the remote control

1 Remove the battery cover.

2 Insert the batteries.

3 Replace the battery cover.

The remote control is ready for use.

Turn over

PowerLite

S5 Series/77c

1 Unpack the projector

You should have the following items:

Projector Power cord Computer cable

User’s Guide

CD-ROM

Carrying case

Password protect

sticker

Projector

remote control

Batteries

RCA video cable

(composite video)

(optional)

S-Video

cable

(optional)

Component

video to

VGA cable

(optional)

Computer

cable

(included)

EPSON

Audio ports

PowerLite S5 Series

PowerLite 77c

1 2 3 4 5 6

Shrnutí obsahu

Strany 1 - Set up the remote control

Quick SetupChoose a locationThe projector supports 4 viewing setups. Choose the best one for your environment. If you install the projector in a rear

Strany 2

Quick SetupChoose a locationThe projector supports 4 viewing setups. Choose the best one for your environment. If you install the projector in a rear

Strany 3

Quick SetupChoose a locationThe projector supports 4 viewing setups. Choose the best one for your environment. If you install the projector in a rear

Strany 4 - Plug in and turn on

5 Adjust the image 1 To raise the image, stand behind the projector, then press the foot release lever and lift the front of the projector. Releas

Strany 5

5 Adjust the image 1 To raise the image, stand behind the projector, then press the foot release lever and lift the front of the projector. Releas

Strany 6

5 Adjust the image 1 To raise the image, stand behind the projector, then press the foot release lever and lift the front of the projector. Releas

Komentáře k této Příručce

Žádné komentáře

Monster Power 128235-00 manuels

Manuels d'utilisation et guides de l'utilisateur pour Supports muraux pour écrans plats Monster Power 128235-00.
Nous fournissons des manuels en pdf 1 Monster Power 128235-00 à télécharger gratuitement par type de document : Guide de l'utilisateur