Epson 2000 Uživatelský manuál stáhnout pdf (Strana 49)

A jumper’s setting is determined by where the jumper is

placed on the pins. Use the following table to identify the

pin settings for 2-pin, 3-pin, and 4-pin jumpers. To locate

pin 1, look at the system board under the jumper; a triangle

is traced on the board at pin 1.

Jumper

type

2-pin

3-pin

4-pin

Position

2-3

To move a jumper from one position to the other, use

needle-nose pliers or tweezers to pull it off its pins and

gently move it to the desired position.

Caution

Be careful not to bend the jumper pins or damage any

surrounding components on the main system board.

Replace any option cards you removed. See page 3-13 for

instructions.

3-8

Installing and Removing Options

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 128 129

Žádné komentáře

Epson 2000 Uživatelský manuál Strana 49