Epson 2080 - LQ B/W Dot-matrix Printer Uživatelská příručka stáhnout pdf (Strana 81)

2-40 Printing on Continuous Paper

R4C3730

Rev. B

A5 size CHAP2.FM

5/10/99 Pass 0

Proof Sign-off:

<Crestec> _______

<Kimura> _______

<Crestec> _______

Advancing the Paper to the Tear-Off Edge

If you use the front or rear push tractor, you can use the tear-off

feature to advance your continuous paper to the printer’s tear-off

edge when you finish printing. You can then easily tear off the

printed document. When you resume printing, the printer

automatically feeds the paper back to the top-of-form position so

that you can save the paper normally lost between documents.

As described below, you can use the tear-off feature in two ways:

manually by pressing the printer’s Tear Off/Bin button, or

automatically by turning on the auto tear-off mode.

If the perforation between pages is not aligned with the tear-off

edge, you can adjust the position of the perforation using the

micro adjust feature. See “Adjusting the Top-of-Form Position”

on page 2-37.

Caution:

Never use the tear-off feature (by pressing the

Tear Off/Bin

button or turning on the auto tear-off mode as described below)

to feed continuous paper with labels backward; they may come off

their backing sheet and jam the printer.

Using the Tear Off/Bin button

After the printer finishes printing your document, check that the

Tear Off/Bin lights are not flashing. Then press the Tear Off/Bin

button. The printer advances the paper to the tear-off edge.

Note:

If the Tear Off/Bin lights are flashing, the paper is in the tear-off position.

If you press the

Tear Off/Bin

button, the printer feeds your paper to the

next top-of-form position.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 227 228

Žádné komentáře

Epson 2080 - LQ B/W Dot-matrix Printer Uživatelská příručka Strana 81