Epson ESC Uživatelský manuál stáhnout pdf (Strana 49)

CONFIDENTIAL

RP-U420 Paper sensor commands ESC c 3

Ver. 1.0

p. 49

ESC c 3

ETTING

COMMAND

[Name]

Select paper sensor(s) to output paper-end signals

[Format]

ASCII ESC c 3

Hex 1B 63 33

Decimal 279951

[Range]

0 ≤

≤ 255

[Default]

= 0

[Description]

Selects the paper sensor(s) to output paper-end signals

• Each bit of

is used as follows:

[Notes] ■ The command is available only with a parallel interface and is ignored with a serial interface.

■ When all the sensors are disabled, the paper-end signal always outputs a paper present status.

Bit Off/On Hex Decimal Function

0 Off 00 0 Journal near-end sensor disabled

On 01 1 Journal near-end sensor enabled

1 Off 00 0 Receipt near-end sensor disabled

On 02 2 Receipt near-end sensor enabled

2-7 Off 00 0 Reserved

Program Example

PRINT #1, CHR$(&H1B);"c3";CHR$(1); ← Journal near-end sensor enabled

Paper sensor commands

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 76 77

Žádné komentáře

Epson ESC Uživatelský manuál Strana 49