EPSON PowerLite 5000 Service Manual
3-7
1. Remove the lamp cover mounting screws from the bottom of the lower case.
Screw: -M4*7.5 F/Ni: P/N1021771
(mounting torque: 4.5 kg. cm = 3.9 lb. inch)
2. Remove the two mounting screws from the lamp inner housing.
Screw: -M4*7.5 F/Ni: P/N1021771
(mounting torque: 4.5 kg. cm = 3.9 lb. inch)
3. Pull up the handle on the lamp inner housing and remove the lamp unit.
3.2.2 Removing the Air Filter Frame Unit
Figure 3-4
Remove the Air Filter Frame mounting screw from the bottom of the lower case. Then lift it
up.
Screw: -M4*7.5 F/Ni: P/N1021771
(mounting torque: 4.5 kg. cm = 3.9 lb. inch)
Screw
Air Filter Frame
Komentáře k této Příručce