Epson CMD-2260 (CD-ROM) Technické informace stáhnout pdf (Strana 113)

__________________________________________________

Blastware Compliance Module

Blastware Operator Manual 4–89

monitors memory is regularly cleared while preserving battery power. It is more efficient to

have the unit call in only once or twice a day to download date rather than several times a day

when an Event occurs.

Note: The “Monitor while calling home” function above does not work with scheduled

downloads. Be sure to schedule your downloads for times when Events are unlikely to occur,

to minimize the risk that an Event will be missed.

To enable downloads at specific times, click on the At Specified Times checkbox to display a

checkmark. Then enter the time information in 24-hour format.

The unit will only call when it is in Monitor Mode. If the unit is set to call home when it is in

Sleep Mode because the timer was set, it will not call home at that time.

(2) Enable Auto Call Home

Click on the checkbox to Enable Auto Call Home on the monitor currently connected to your PC.

The unit must have the Auto Call Home settings configured.

(3) Dial String

Enter the dial string for the remote modem you intend to use with the monitor. The dial string

must include the phone number for the telephone line to which your PC modem is connected.

Your modem type may use a different dial string. Consult the documentation that came with your

modem.

To change the string, click on the text box and enter the dial string. To insert a comma in the dial

string without causing a 1 second pause, place the characters “\,” (backslash comma) into the

string.

Note: The dial string for radio modems is RADIO RING.

(4) Auto Answer: On

Enter the text string the monitor sends to the modem to turn Auto Answer mode on when the

modem is in data mode. The default text string has been tested on various modems from different

manufacturers, and found to work adequately. However, you may wish to change the string to

improve performance. Consult the documentation that came with your modem.

To change the string, click on the text box and enter the text string.

Note: The Auto Answer: On string for radio modems should be blank.

(5) Auto Answer: Off

Enter the text string the monitor sends to the modem to turn Auto Answer mode off. The default

text string has been tested on various modems from different manufacturers, and found to work

adequately. However, you may wish to change the string to improve performance. Consult the

documentation that came with your modem.

To change the string, click on the text box and enter the text string.

Note: The Auto Answer: Off string for radio modems should be blank.

(6) Modem Power Controlled by Relay or Remote Alarm

This setting enables you to conserve modem power for longer operation. The Blastmate III,

Minimate Plus and Series IV units automatically toggles a pin on the auxiliary port that can be

used to power the modem on or off as needed. The Warm Up Time is to allow the modem to

initialize. Please contact Instantel for advice on relay settings necessary to use this function.

Warning: The alarm cannot be used if this feature is enabled.

(7) Communication Timeouts

This area contains information on the modem communication setup. You cannot change any of

these settings. Number of Retries indicates the number of retries the monitor will make to call in if

the line is busy on the first attempt. Time Between Retries is the time in seconds between these

attempts. Wait for Connection is the time the monitor waits for instructions from the PC after its

call has been answered; if no instructions are received within this time, the monitor terminates the

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 223 224

Komentáře k této Příručce

Žádné komentáře

Epson CMD-2260 (CD-ROM) Technické informace Strana 113

Komentáře k této Příručce

Související produkty a manuály pro Software Epson CMD-2260 (CD-ROM)