Epson CMD-2260 (CD-ROM) Technické informace stáhnout pdf (Strana 205)

____________________________________________________

Blastware Advanced Module

Blastware Operator Manual 6–15

32768 0.6 0.4 0.3 0.2 0.1

16384 1.2 0.6 0.5 0.3 0.2

8192 1.5 1.0 0.8 0.6 0.4

4096 7.3 3.7 2.4 1.8 1.2

2048 14.7 7.3 4.9 3.7 2.4

1024 29.3 14.7 9.8 7.3 4.9

512 58.7 29.3 19.6 14.7 9.8

vi Auxiliary Trigger

The auxiliary trigger is an external triggering mechanism used to start monitor recording.

A variety of optional auxiliary triggers are available including the DS 20 Wire Trigger (Part No.

677A3901), and the Blastmate Trigger Cable (Part No. 712A3901) used to connect several Series

III monitors together for multiple point blast monitoring, or for Series IV, use the Wire Trigger

Cable (Part No. 720A3501).

To use the auxiliary trigger, set the monitor in the single shot, continuous, histogram, or histogram

combo record mode. Set a fixed record time. The auxiliary trigger does not operate in the auto

record time setting. Click on the Auxiliary checkbox to display a check mark.

vii Settling Time (Series IV Only)

The Settling Time represents the time required for the sensor vibrations to dampen out caused by

the sensor being powered on or when monitoring starts.

(3) Command Buttons

To choose one of the following command buttons, click the mouse pointer on the button.

i Send To Unit

Send the settings to the monitor and close the Advanced Setup dialog box.

ii Cancel

b. Notes

Refer to Section 4.2.2b for information about the Notes dialog tab.

c. Special Setups

Refer to Section 4.2.2c for information about the Printer Setup dialog tab.

d. Printer Setup

Refer to Section 4.2.2d for information about the Special Setups dialog tab.

e. Library Files

Refer to Section 4.2.2e for information about the Library Files dialog tab.

6.4 Sound Level Microphone Setup (Series IV only) [Optional]

The optional Series IV, Class 1, Sound Level Microphone can also be used in the Advanced mode. The

data will not be weighted or filtered and it will be recorded in either Pascals (Pa) or PSI units. To configure

the Series IV unit connect it to a PC running Blastware and select the Advance setup icon.

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 223 224

Žádné komentáře

Epson CMD-2260 (CD-ROM) Technické informace Strana 205